Break it down step by step
Locate your water filter cover on the left side of the refrigerator’s base grille.
Push the eject button to release the filter.
Pull the filter out and discard it.
Open your new filter and remove the protective coverings from the O-rings.
*Note: Be sure the O-rings are still in place after the cover has been removed.
Place the filter cap on the new cartridge so the ridges align.
Turn the cap clockwise to lock into place.
When inserting the new filter into the slot, make sure the arrow is pointing to the left.
Push the filter in until the eject button pops back out.
Once your filter is replaced, run four gallons of water through the line to properly flush the new filter.
